Quote:
Originally Posted by Captainclock
I don't have a pair of needle nose pliers that would work with removing this nut. all I have are the really fine needle nose pliers that are only good for removing small nuts and bolts that are about 1/4" or smaller not ones that are 5/8" in diameter or larger.
EDIT: I think they have those nuts glued into place because I tried both a screwdriver and a pair of needle nose pliers and the nut wouldn't budge I think there has to be a way to remove the pot from the back side of the panel without damaging the pot.
|
I worked on a Magnavox stereo that was built in 1974, that had those inverted palnuts. The assembler at the factory, tightened the nuts, so tight that there was NO WAY IN H*LL, that I could remove them, without the proper tool.
