[timmy]

that is a verticle problem , i have 3 of these sets i restored and i would suggest looking close at the verticle section including micas in the verticle there are several for that section. i had the same lines you have there and i changed the micas in the verticle after i recapped the set thinking they were alright. looks like the frequency is off alittle seemingly consistant with one of those micas. i listened to everyone telling me that micas rarely go bad, well they do and they went bad on all 3 sets i got. there are 2 dog bones off the 6sl7 which can be replaced with ceramic discs, and the tie strip to the right of the 6sl7 there is another dog bone. the vert hold pot , there is a tie strap there in that area which has 1 mica and 1 dogbone, they should be changed as well. the chassis in 1 set i got which gave me the worst headache was the ts4d. and if you go back and change those micas and dog bones you should also go back and tweek the channel 3 coils, IIRC there is another coil there that will have to be tweeked as well there is not only 1. i wouldnt use a 1n4007 in place of the 1n34. whats up with those blue caps in the hv section there, there should be all those white caps.