Quote:
Originally Posted by dieseljeep
That resistance can't be that high! The tubes wouldn't light up. You can run the set without the CRT, but the yoke has to be connected. 220's are probably enough capacitance.  |
I forgot to mention that you have to jumper the CRT socket, pins 1&12 to get the tubes to light, without the CRT in the circuit.
Regarding the heater dropping resistor, what kind of meter are you using?
The reading is off, by a factor of 10. The resistor looks original, with a W-G part number. As before, the tubes wouldn't lite, if the resistor is 330 ohms, instead of 33 to 36 ohms.