|
One side of the new transformer has four leads, meaning two windings, while the other side only has two leads meaning it connects to one winding.. I want to assume the side with only two leads is the primary, but the primary on the schematic is the 28 ohm winding, and the isolated leads on new transformer show .3 ohms.
Should I assume that the 20 ohm winding is the primary, as it's closest to the primary on the schematic?
When I say primary, I'm talking about the side that's directly wired to the power switch and wall plug. I could be thinking about this wrong.
__________________
To keep your tubes running smoothly, make sure to dust underneath the glass as well.
|