Quote:
Originally Posted by rca2000
Mine IS a VLP-970 HF. I DID like the way it worked...a few years back. But it has NOT been powered on i a while...since the tuner...then display...died. Likely...caps bad, or if it uses that DC converter module to provide tuner/display power, maybe it died.
From what I have learned our VCR's were the "cat's meow" for 1986...at WELL over 1K new !!
I got mine cheap...maybe - or so years back...just needed the load belt....THEN.
|
im glad to hear that you liked yours
it sounds like yours may have the same problem mine has, im thinking the part that helped bring it back was taking apart the little press fit ribbon cable sockets that connect the two logic/clock boards and scuffing the internal contacts with a scotch pad and a flat head jewelers screwdriver. they look like regular 2 part plug and sockets where the cable is crimped into a plug but they are not! i almost broke mine by prying it apart, just press down both sides of the socket and the cable will come out without bending the wires. mine looked like the contacts were made out of copper but plated with solder but it was flaking off and causing a bad connection. i also found a short and stubby blue matsushita cap below the giant hitachi ic that had leaked and somehow started eating the traces on the back side of the board
i think it may have been a filter cap supplying power to that main ic
i will have to post pictures for anyone else who runs into this issue that wants to fix it
