Quote:
Originally Posted by tom.j.fla
OK, so you are telling us that the voltages are fine but you have retrace lines, after the retrace mod was done. Resistor good did you check the cap.? There is one or two things it could be bad cap. or wiring error, so check again the part and work. All the best,Tom
|
It's just the opposite where the lines are, the bottom rather then the top. The wire ,number 3 goes to ground unless the retrace mod is done and it was by the factory and the resistor is fine the cap I don't know even if it's bad I don't think it's going to reverse where the lines go.