Quote:
Originally Posted by tom.j.fla
To answer the question from #8 yes it can. The ts4d has a stacked B+ setup so H-K leakage in v1,v4,v6,v11a could put the buzz in the sound those before mentioned tubes are between B++ and B+so anything in the B+ line will be affected. Best to check for hum on B+ line with a scope. Also failing selenium rectifiers can sometimes do that as well. Un bypassed silicon diodes also can add noise on B+ lines. If you don't have the Motorola factory manual you can get it at the ETF site. All the best,Tom
|
I have another set with diodes and don't have the hum so there has to be something to blame here so I could change the diodes and see after I check the tubes in question. What are you referring to when you say unbypassed diodes? I am certain about a bad cap in the B+ since paralleling other caps with really high UF so if that was the case the noise would have stopped doing that.