|
Greetings: I just am completing restoration of this model set and its a fun one! Its a little cramped underneath but if you take your time you'll get it restored. I really suggest that you do your filter capacitors one section at a time (resist the temptation to just cut the leads and do all the sections at one fell-swoop). Its easy to omit something or make a mistake. Thats what happened to my set when a friend of the previous owner I acquired it from went through the capacitors. He made a couple mistakes which prevented the set from working, but correcting those errors resulted in a nice picture. Also you probably should not overlook the mica capacitors especially in the vertical and horizontal sections; I am seeing more and more of them getting bad and you'll see it in poor linearity. Pay special attention to the mica 100pF / 500 volt cap in the vertical amplifier!
Good luck and have fun! This is a cool set!
-George-
|