|
Guys,
The heater ohms out good on the CRT.
There is no HV. I used my Polaris 40KV probe and no HV. I ohmed out the coil and it checked very good to the schematic values. I cleaned the pins on the 1B3GT and its socket too. I didn't see any glow from the 1b3GT but I think it might be real hard to see.
C96 looks like it had wept a little, so I think I'm going to order and replace all the caps in the HV section along with the HV OSC section too. Probably get the resistors too, won't hurt.
Next thing to do is get the CRT checked out on a working set. I'll contact my friend about that.
|