Thread: Packard Bell AGC issue
View Single Post
  #4  
Old 06-24-2016, 01:48 PM
DaveWM DaveWM is offline
VideoKarma Member
  
Join Date: Feb 2009
Location: Orlando FL
Posts: 5,607
yea that is where I would start, but there may be some other stuff in there as well. Should see a 600v pp at the plate. See if there is a 10meg resistor from a B+ to the RF agc
Last edited by DaveWM; 06-24-2016 at 01:52 PM.
Reply With Quote