Quote:
Originally Posted by timmy
Yes there are resistors that look like Micas and this resistor is between the 6x5 and 25z6 for the negative side of B+ . I found a site that shows the type resistor I have and it says this type resistor that has 3 color dots they are saying to read them like any other resistor like all the others with colors so I came up with anywhere between 100 ohms and 190 ohms because the first color is brown , next unknown, and a spec of brown on the third so I figured I would go between and put a 150 ohm because the original was burned in the middle measuring 1.2k ohms and I have a small issue with horiz and vert not filling top and bottom so if this works I'm good to go. Oh and yes it's the dreaded teletone that so I read many people having many problems with this particular set.
|
The resistor in the negative source, between the two 30mf caps is a 1.2k 1w wire wound resistor. Red turns brown real easy with heat.
I've seen that type of Micamold resistor and most were tiny wire wounds.
WW resistors seldom change value, especially that much. They, most of the time, just open.