The last day or so was spent taking inventory of what parts are needed and making a list and where to get them from. Some I had "in stock" while others will be ordered from Just Radios and Digikey. I've decided to bump up the 1/2W to 1W, the 1W to 2W and the 2W to 3W. Some of the 2W resistors seemed a bit discolored and heat stressed so those 3 will be replaced with 5W (R70, R71, R73). There was one resistor clearly bad. It had split open due to excessive heat. It is R76 a 470 ohm 2W resistor. This will be replaced with a 470 ohm 10W resistor the local parts house had in stock. It will still fit nicely in the chassis.
I'm using the taller, slender Nichicon 105c E-Caps so they'll fit into the cans. There are 2 cans with 3 each caps in them
