I made some good progress today.
The HV cage is done. I replaced the .00047uf 10,000 volt cap with a .00047uf 15,000 volt cap and the 2 680K 2W carbon comp resistors with some new 3W resistors.
I started to replace the paper caps on the section that I started work on. Some of the paper caps were "buried" under other components. This causes a lot of other components to be lifted to gain access. I decided to go ahead and replace all the resistors along with the paper caps in the Horizontal section.
I'm including some pics of my progress. Also a picture of the enlarged schematic that I'm using and I high light the components when they have been replaced. Pretty much the horizontal section.
