I almost forgot I wanted to glue the CRT base back on. It was just a little loose. I use some glue I got at Walmart labeled E6000. It's high heat, flexible, and bonds glass to plastic and such. I squeeze out some in a small mixing container and add some acetone. I mix it up thoroughly to the consistency of syrup. I then suspend the CRT facing up and "trowel" the glue where the base meets the glass CRT with a round toothpick. I go around the perimeter of the base and as the glue seeps down into the base, I add more glue. When satisfied, I wipe down both the base and the CRT with some acetone. I'll let it dry overnight.
