My E-Caps came in today so I decided to build them up.
I use hot glue to hold them together and some 600 volt solid wire for the leads. I color code each cap and make notes as to what cap, wire color, goes to each symbol. I want to match the originals.
On the C2 which has only 3 caps, I used some balsa to from some spacers for the lower cap. This help stabilized the whole thing.
The pics speak for themselves.
Later tonight, I cut off the original cans, clean them and then the E-Cap re-stuffing will be finished and they'll be ready to install into the chassis.
