Quote:
Originally Posted by dieseljeep
That ones a little different than the common Arrow-Hart type.
The original wire used was probably cloth covered rubber single conductor stranded wire. One for antenna, one for ground.
When I would see console radios at the Goodwill, many times, they still had that type of plug connected to the antenna and ground wires.
It was great, when the radio had to be moved for cleaning or decorating, but it always seemed the the radio always to be in the same location.
|
I think they might have been custom. The outlets in the building are Leviton, but the covers have a design around the edge that I can't find anywhere. I've searched high and low, but never found another to replace broken ones.
The wire used in the wall is 14ga. I guess they just used standard electric wire. As for the wire for this plug, I'm guessing it was around 16 - 18ga?
__________________
Pioneer SX-1080, Pioneer PL-115D, Pioneer CT-F9191, Pioneer RG-1, Wollensak 8050A, Akai 4000DS MkII, Pioneer CS-05 & Polk 1.2TL
Denon 5803A, Pioneer DVL-700, Pioneer CT-W603RS, Toshiba HD-A3, D-Link DSM-520, Dish VIP-722, Polk 1.2TL, CSi5, LS/fx, RT-800 and PSW-650
|