Quote:
Originally Posted by bandersen
Oh sorry, I didn't realize that was the Sams. Direct coupling for the dummy antenna means don't use a capacitor.
Yes, if the meter is showing a peaking response. By that I mean there is definitely a peak as you adjust the slug. I've worked on many sets where the maximum was a negative voltage. Annoying that they never mention that in the alignment instructions.
|
Bob,
Yes, it seems on the -DC volts is where I get a definite peak. +DC volts setting there wasn't any real peak. IIRC, the needle would go go up but never down.
I've adjusted the Video IF using my VTVM and a signal generator turned almost all the way down. Next I'll hook up the Eico 369 and O'scope to see the response curve.