Here is what I have. The waveform looks pretty much like the ones I have already gotten.
Total width is 28.6 to 21
Central trough is at 25.6
Left "peak" is at 26.5
Right "peak" is at 24.5
Vertical graduations is at .2 volts
Horizontal graduations is at 5 volts
I've included a picture of the controls on the Eico 369.
It seems that the frequency isn't where it supposed to be as in the trough should be 24.3.
Also midway on the "high" slope is 27.25 instead of 25.75.
It kinda looks like the waveform is about 1.5 high?
BTW, I'm using the marker to determine the freq of the waveform which is connected to my freq. counter.
Any ideas? I'm not going to do anything till I hear back as to what is going on.
As always, your help it is appreciated.
