Quote:
Originally Posted by bandersen
I suspect you RCA RF generator is off. Using a modern frequency counter with an old RF generator can give weird results. How about doing the alignment visually ?
I find that adjusting the scope / sweep gen settings so that each division is 1MHz to be very helpful.
|
Good point. But I failed to mention that I'm using a totally rebuilt Eico 322 generator and the freq. counter is attached to another BNC which I've added. Sorry for the confusion.
I'll tweak the coils to see if I can align it visually.
How do you set the scope up so each division is 1mhz?
Thanks.