Quote:
Originally Posted by tom.j.fla
Crist, the crt in my set is a 17HP4 "C" as labeled by the rebuilder, most likely to show that the jug has a straight gun. Old_coot88 is correct that a width sleeve is needed to control the width on your set. The brass or copper is 1/2 to 3/4 the dia. of the neck and is sealed in thin sheet hi-temp plastic. Try to find a sleeve from a junker or make one. All the best,Tom.J
|
Tom,
Thanks for the info on the CRT.
I'll look for one of those sleeves.