Quote:
Originally Posted by tom.j.fla
If you make a width sleeve DO NOT over lap or let the ends of your metal to touch! If there is over lap you will have a shorted turn and you will kill the horizonal stage. Learned that one, decades ago the hard way. All the best,Tom.J
|
Tom,
I plan on using some .003 brass shim stock that I have. I plan on making it about 3/4" wide and about 4 inches long. The 4 inches come from the length that I need to push it in from the aft side of the yoke and long enough to clear the centering rings. I'll cover it with some packing tape for now for this experiment, till I can get high temp tape. Does this sound right to you?
Not exactly sure about your warning. This will be more like a strip rather than a sleeve.