My CL-90 came in and I installed it between the line and the 10 ohm resistor in the filament string. I installed it with the long leads and in the open. It took the voltage from 117vac to 113vac for the 115vac filament string.
I then installed the 15 ohm 50 watt resistor from the line to the B+ supply. With the resistor installed and the TV plugged in the wall, the B+ is now 132 volts.
Then I installed my speaker disconnect using some RCA phono jacks and plugs.
This pretty much concludes the assembly of the chassis.
The thing that still bothers me is the too wide picture and I had to use the sleeve to reduce it. When using the sleeve the HV is reduced by a fair amount. I really didn't like reducing the HV from 14.5Kv to around 10.5 to 11Kv.