|
Alright, so after removing them to view the values we have (followed by available replacements):
1x .01 mfd @ 600V --> .01uf @ 630V
1x .22 mfd @ 400V --> .22uf @ 630V
1x .10 mfd @ 400V --> .1uf @ 630V
1x .47 mfd @ 200V --> .47uf @ 630V (Is the voltage jump too high on this one?)
1x .0012 mfd @ 600V --> .0010 or .0015uf @ 630V (I can go +/- 20%, but I am not
sure which would be best)
From my understanding, mfd is equal to uf. Also, that going higher in voltages is perfectly fine and choosing a new capacitance value within +/- 20% is fine.
The other caps are MICA caps and from what I read, those are usually good. Is there anything I'm missing and do the replacement values seem viable? Again, thanks for all the help!
|