Quote:
Originally Posted by zeno
The 2 red jobs were tantalums one by the jungle & usually
one on the low side of the yoke IIRC. Common fail for many
Toshibas. One by jungle gave small size & the other lin
problem IIRC
73 Zeno 
LFOD ! |
Look closer - there is one red clad radial electrolytic - Marcon made them. They were bad from the get-go. Decoupling for the Jungle Chip, and they cause fringe color problems, loss of sync, or chirping while changing channels. We found them through in-circuit ESR testing, but Toshiba issued a supplement to their manual, requiring changing them should a bad jungle chip be suspected.
__________________
Brian
USN RET 22YRS (Avionics/Cal)
CET-Consumer Repair and Avionics ('88)
"Capacitor Cosmetologist since '79"
When fuses go to work, they quit!
Last edited by Findm-Keepm; 09-29-2017 at 06:39 PM.
|