Quote:
Originally Posted by jr_tech
If you mean 220pf as a substitute for the 200 in the first sentence, then yes, all of the substitutions should be fine (all within 10% of the desired value).... I suspect the original parts are 20% anyway.
Are you going to be using the set with a VCR? Most older sets do not do well with a signal from a VCR because the horizontal AFC is too slow (causes flagging of the top of the picture) reducing the 200pf to 150 or so, possibly could help if this is a problem.
jr
|
Yes, I corrected my post. Typically I don't use a VCR. Maybe I should use a 180pf instead of a 220pf just in case?