Quote:
Originally Posted by bandersen
Keep in mind the fusistor is only on the B+, not the tube filament string. I'd guestimate something around 200-300 mA of current.
Also the reason for the resistor is that the old rectifiers can't take the surge current. Modern are more robust especially if you go with 1N5408s. The resistor value isn't critical.
I also suggest adding another fuse to protect the whole set.
|
Bob,
Thanks for the quick reply. The TV is rated at 150W or 1.3A. Less the 600ma filament string gives me .7A through the Fusistor. If I'm reading your reply correct, I really don't need a Fusistor, just a fuse upstream of the filament tap off....right? I could easily relocate the filament tap off to the downstream side of a fuse.