View Single Post
  #3  
Old 07-10-2017, 08:04 PM
old_coot88 old_coot88 is offline
VideoKarma Member
 
Join Date: Sep 2009
Posts: 2,644
I would run the vert. hold stop-to-stop before diving into it again. It may be locking at an odd sweep rate.

Also, on the line voltage issue, measure the heater voltage. If it's running signifigantly above or below the nominal 6.3 VAC, it'll tell you whether the line voltage is kosher or not.

Last edited by old_coot88; 07-10-2017 at 08:13 PM.
Reply With Quote