|
Well if there are bias issues somewhere I have not found any high or low value resistors that were bad . I have a Dvom that I can check capacitance on capacitors so I am wondering if I got a possible bad cap because I know when you get small waves in the picture that usually means a bad cap , not filtering the ac out and that's really the only noticeable thing other then the weak vert lock that I see going on with this set because of probably the low b+ . So now I should look into the caps in the p s that I put in as possibly bad. And I do know it uses half to get the 125 Vdc for the b+ . So now I will have to doubt my Dvom for cap checks if I find a bad one.
|