|
The SAMs shows 410 v on pin 6and 10 and 30 v on pin 11 but I'm getting around 460 v and 40 v on these pins but I changed the 10 ohm resistor on the ac input to a 22 ohm so I may have to raise that resistor higher but even those voltages being high I thought I should still get a raster and I even tried a 12lp4 to rule out a problem with the right tube and got nothing. Also used the ion trap in all positions, nothing. Video output tube pin 9 should be 155 v but I'm getting 204 v and pin 8 130 v I'm getting 140 v .
Last edited by timmy; 12-02-2017 at 01:31 PM.
|