[timmy]

Ok the volume control checks out, wiper to end does vary the way it supposed to. So now still at dead end, I even tried other diodes thinking one may be leaky but no luck there and I also paralled every cap still no luck still hums. The Motorola Manuel showed reasons for a hum and I checked that out still no luck. When I first got the set I had to tweek the IF for a clear pic and sound and the Manuel says if the oscillator is adjusted to high it's considered to be overloading and the audio would get a 60 hz hum carried along the verticle circuit, strange, hmmm. Checked around the verticle to no avail. What I also tried was I turned the 3 adjustments L17 ,L19 , L27 4 turns cw then 4 cww to see if that made a difference in the hum if that were the reason but I never did turn them a lot in the beginning.