Quote:
Originally Posted by pdr-fml
Here is the result on graph paper after my IF alignment. I know it has some issues but going on some info I've read from different sources it isn't too bad. I think I will purchase a sweeper sometime in the near future so I can more easily touch it up. I plotted every 100kHz.
|
It does look pretty good. If you could just slide the lower side to the left a little, so that 22.4mc is about half way down the slope, you will have it very close. As-is your limiting your video bandwidth a little. Also you want your 21.7mc audio carrier to be right in the crutch at the bottom of the slope. Make sure you're using the correct set of frequencies from the Sams chart per your specific chassis number.