Quote:
Originally Posted by Sealtest
Instead of cutting the wire I will unsolder the live side and connect everything there. Eventually a test rig will be made but I just have to find all the parts around here and something to mount them in/on. I am a bit afraid of frying my meter but first I will try this with a junk meter, then move to the better meter.
I looked on the internet at those Sencore units and saw one for over $400. It sure is a nice unit though. I will keep an eye out locally for a unit like that (I've got many C-list adds looking for this stuff). Locally not too much has shown up but what has shown up gets used almost every day.
|
Good call, I've done my share of damage due to inexperience.
On my meter the jack for testing current draw is fused so nothing to worry about. I would rather avoid blowing the fuse though, those I need tend to be unavailable locally.
Keep your eye on the listings, 4 bills sounds like a pretty common gouging for one of those units. Fortunately I found a nice one for a decent price when I had some extra scratch come in, around 3 bills shipped in early 2015, and even then the cross-border shipping prices were pretty bad. I'll probably still make a test jig for my meter though as that measures current draw up to 10A.