[Crist Rigott]

I restuffed the E-Caps today. I usually use Nichicon 105 degree caps, but this time Mouser had some from a new supplier. The specs looked good and they all had a 12,000hour rating! So I ordered what I needed. Here is a link:

https://www.mouser.com/ProductDetail...XL451ELL121MM3

I used my usual method of using a PVC sleeve. All of these E-Caps has a cardboard cover so I made the parting surface up from the base. When the can goes back on I'll run a layer of tape over the seam to secure the can and then slide on the cardboard cover.