|
It's true that I do not have it on very long when I do turn it on, and I have not yet run the horizontal setup procedure , as it says “ tune in a TV station and set controls for normal operation” However, this can prob, be done just as well with the injected video.
As for not being able to tune anything in yet, ( this is most likely due to entropy, for it used to before )
After all electrolytics are replaced, and I have confirmed that the B+ on all the voltage dividers is OK, and tubes check OK, I will probably go over the whole thing end to end and measure tube voltages (K/G/P) .
which may, hopefully give clues to problem areas.
Last edited by Yamamaya42; 02-25-2019 at 02:14 PM.
|