Quote:
Originally Posted by radio nut
Well primary is powering the rectifier only, secondary shows as open. Without a Sam's diagram I am not sure what transformer to buy. I ended up years ago on a site that had granny's that might work but not sure how much high voltage the b+ line should even be......
|
The set's too old for Sams coverage!
The H/V winding should show 370 ohms from the center tap to each plate, pins 3 &5 of the 6X5 socket.
The replacement transformer should have around 310 vac from C/T to each plate @ 40ma. The 6.3 volt heater winding should good for 4 amps.
