|
I don't know that exact model, but the following applies to a lot of LG plasma TVs -
Disconnect the main board (the one with the HDMI /etc inputs on it) from the power supply.
Connect power - without the main board connected it will power up. If you get the grey screen and it now stays on then the power supply and sustain boards are probably ok.
Find the AUTO_GEN pins on the controller board - short these pins and the controller board will generate test patterns. This will confirm that you panel, sustain boards and power supply are good.
Most of the time the main board is the problem. Often you can reflow the main IC on the mainboard with a heat gun and this will fix the problem.
|