Update,
Got the set working and looking better so far. I got some practice in doing purity and convergence setups and that was pretty cool
and its looking pretty good. though not quite where it needs to be.
HV output was 16kv at about 175ma. I was able to bring that up to 24kv, that brought me up to around 210ma, I was able to get that down to around 200ma
Some fields on convergence can get sorta close with their pots at max, so I am going to check out some resistors and see if anything is outta range.
I noticed the sharpness/focus adjust does not have any effect. it looks like that coil has had work done in the past. so gotta figure that out as well, its a little off.
One of the 3 metal electro cans started getting warm after running a while, guess I know what I am going to be doing about that hehe
However something that kinda has me wondering what is up and I am not sure if I want to run the set more until I know what is going on,
about 4 hours of running as I was working on the set I started getting a hiss like sound coming from high voltage area. Letting the set sit overnight and firing it up this morning, did not have that hiss sound until about 15 minutes of running and then it returned. Any ideas what that is about?
And I got a picture of my first time doing a purity and convergence setup!