Quote:
Originally Posted by Electronic M
May want to check the cap against it's listed value on the schematic before you order to be sure.
Those are the diodes. I'd order 2 and wire them in series for the focus rect...That way if anything arcs to the focus line it won't take out the diode as easily.
IIRC last time I did a fly doughnut the customer wanted me to use Permatex gray from the auto parts store...I recommend any 'sensor safe' silicone caulk (other types may contain acid that can corrode wires overtime).
Rubbing alcohol, glass cleaner and Goof off (a flamable liquid cleaner)are my go-to for HV cage cleaning. Goof off can dissolve plastics and some paints so I tend to reserve it for metal and as a nuclear option for some issues.
|
Good call there Tom! I have not yet placed the order. I checked the schematic and its lists that cap at 130pf not 13.
https://flic.kr/p/RSgie4
Oh good, I wanted to make sure that was the silicon : D
Sadly I already found out that goo off can dissolve plastic a little while back : /