[Rocket]

Originally Posted by Yamamaya42

OK, this just got a whole lot weirder... I seems whoever worked on this before me, ( the jerk who removed the cover off the IF board and lost it & REMOVED the color PCB... ) noticed the problem with the burst amp, and tried to fix it... because when I checked r163 and r144, they have already been replaced with metal film 2%, so I'm still in the dark as to why the cathode v is so high....

Rocket. if you ever get a chance, with your chassis in service position, and a good stable color pic, can you measure all the voltages on R10 ( color killer pot ) Sams says they should be 30 ish in voltage

Yeah sure thing, I actually plan on throwing the chassis in for a test run tomorrow to check and see how its performing after replacing a few caps. : D