If I have learned anything over the years, its never underestimate the stupidity of those who came before you.
Poking around the color pcb I have seen that most all resistors have been changed, with what looks like 1 watt carbon film, it calls for ½, and this is no problem really. I'm using ½ metal film, you can see the 2 new one I just put in in the pic, they ALSO replaced some caps, cause some disc one look new, and the person who did it, does not know how to shape leads correctly cause I see a lot of cracked meniscus, a big NO NO in my line of work, but THEN I SEE what is shown in the pic, problem with c96, and no doubt causing my voltage problem... WTF? Very careless...
https://imgur.com/YTsHAxc
Rocket, your readings are right where they should be, thanks!
