this is what has me confused...
Am i reading too much into it? an just go with is on the sams?
https://imgur.com/g4gMKmr ctc-16x
https://imgur.com/KsYqFI8 ctc-20
https://imgur.com/fDhZQ3W ctc-16
EDIT...
I'm still disturbed as to why that wave on G1 was so high, this may be the cause of everything, overpowering any video trying to get in, source is FBT pin 7, also goes to conv socket , pin 8, where it's shown to be at 270v , when I get the cap set in, add to check list, c94, c97, r145, r146, ( did they put a wrong part in? )
There has to be some reason that the horz pluses going in are so high that the Amps can't work.