Quote:
Originally Posted by old_tv_nut
Scope each end of R144 directly. You should see the 150 v pulse on one end if it's connected to G1. You should see zero on the other end if it's actually grounded.
If you see zero on both ends or 150 v pulse on both ends, one end or the other is not connected.
|
I will check that this weekend, tks, I replaced r144 & r163 last weekend, cause i suspected something, I will check more of the carbon film ones that were put in this weekend, esp r145, when i replace some of the disc caps that look like they have not been replaced yet.