|
Thank you very much!
Mine, being an Electrohome, is a little different from the instructions. The projector looks the same, but my screen has a white molded plastic back, with ELECTROHOME molded into it, and a tilt mount, with instructions how to set it to the correct angle by hanging a weight on a string off the top front, and measuring 7 5/8 inches from the bottom.
The screen is in decent shape - it appears to be some kind of aluminum film which is stuck directly to a plastic dish shaped background. The film is bubbling up in a couple places, but I'm just leaving it as is.
Your instruction book helped me to set up the position of the projector correctly. It doesn't completely fill the screen at the top left corner, and the bottom has a slight bow to it, so I think it will need some work.
One interesting thing I noticed, is the pattern generator only works when the unit has a video signal. If you switch to convergence when the unit is on but not connected to any source, it's just a blank screen.
|