Quote:
Originally Posted by LADR
Got a new varistor, thermistor, 6GM7 and two caps in the vertical section. Still waiting on a new terminal strip. Tested the HV today and it pegged my meter. Tested 1k that’s on pin one of the 6BK4 and the two 1.5Ks that goes to the HV adjust control and all three are pretty much right on. Suspecting the 6BK4 right now.
|
I will assume that to be a typo, cause R135/137 are listed as 1.5 meg, however, it does say in horz sweep setup, to set to 24kv, not that the 1kv diff will matter much, what does matter is the horz output cathode current and the voltage drop across R136, have heard from many sources that too high cathode current will cook your FBT.
