Quote:
Originally Posted by freakaftr8
I was thinking of measuring the H to H voltage across the pins on the CRT neck. This should hopefully give me an idea of what it normally runs at. Even though I cranked around the screen and BKG pots, there is no red BKG pot. This is of course the weak one.
|
Does this set have filament voltage derived from the flyback? I think that's common on Sony TVs. If that's the case, make sure to check it with a VTVM or meter which has decent response up to 15kHz - an ordinary DMM may give a falsely low reading here, since most aren't accurate above about 1kHz.