[freakaftr8]

So I backed down all the adjustments to where I started, and noticed the red is now being driven towards center. The screen pots for B and G are damn near at centerline to achieve a good white balance. I have the BKG at centerline as well on all three pots.

I cranked everything up to max until I had a bright green screen with retrace lines, then it went to yellowish then red popped in. I left it like this for 20 minutes and backed it down. Then let the set cool for an hour and it stayed the same.

Well see how long this lasts I guess. Picture is pretty decent now. Just a bit out of focus around the corners, and if I turn up the picture level too high, I get green or red smearing. (Weak CRT still I'm sure due to poor focus tracking on the corners and sides of the CRT which will not pull in). I suppose I can always connect my anode probe to see if I have close to 30kv.