Quote:
Originally Posted by freakaftr8
Overnight results. Not horrible but that green gun may be a little on the weak side.
Good thing is, the needles don't drop when using life test..
Had a quick look at the flyback.. there's some wax. Doughnut is not too crusty and no obvious carbon tracks...
Looked for obvious issues and everything seemed like it was ready for the gold..
Disconnected HOT plate cap, used my light bulb variac cord... instant circuit breaker trip. Have filament glow to all tubes. Light was not showing a short. reset breaker, tried once more.. bright light and circuit breaker trip again.
2nd can lytic is quite warm to the touch. Obviously a short in the b+ filtering.
So to recap, it needs a recap..  |
is wax loss like that something to worry about?