|
So I have most the chassis electrolytics recapped along with the white wax ELMENCO caps. Also found the usual drifted 150k off the vertical height pot.. 1 bad 6GM6 found thus far. Probably contributing to the near blank raster I was getting. Also going to replace that yellow dry 40mfd or so axial dry cap on the vertical board for good measure.
More to come.
Edit: those ELMENCO are apparently ceramic mylar according to the internet. is that true? They test good.
__________________
Honey, turn on the tv.. I'm cold!
Last edited by freakaftr8; 09-21-2019 at 08:59 PM.
|