Quote:
Originally Posted by vortalexfan
I checked the filter choke with my ESR/LCR Meter (which also checks resistors and resistance loads) and the filter choke checks out within tolerance of the original specs given in the Sam's Folder, it checked at 27.7 Ohms and 1.69 Henries, which the original specs given in the Sam's Folder for the Choke is 32 Ohms and 1.5 Henries.
As for the individual leads checked to ground, one lead read 254 Ohms and the other lead measured infinite.
|
[Edit] I'm not sure how it can measure 27.7 ohms across the two leads and be infinite from one lead to ground. But it's bad none the less.
