Quote:
Originally Posted by Kevin Kuehn
Don't worry about the 6T8, it has no bearing on your power supply issue and in fact you can remove it from it's socket if it's bothering you. So did you measure the voltages on the 6V6 audio output tube?
|
No, I didn't yet.
But I did figure out that pretty much all the resistors in the audio circuit that are associated with the 6V6 and the 6T8 tube are all measuring bad (either way high or open), also the 6,000 ohm 10% 20 Watt wirewound resistor that's part of the HV section is measuring open as well in the Sams its called the Damper Filter-Wirewound, which might be why I'm not getting any HV and also might be part of what's causing the TV to motorboat.